All you need to do is... right-click on an empty Desktop spot -> select New -> Shortcut -> type shutdown followed by a space, and then enter one or more of the parameters listed below -> click Next -> type a suggestive name for your new shortcut -> finally, click Finish.
This is the Shutdown.exe (located in %systemroot%\System32, usually C:\Windows\System32) syntax:
shutdown [-i|-l|-s|-r|-a] [-f] [-m \\computername] [-t xx] [-c "Text"] [-d[u][p]:xx:yy]
Valid command line switches:
-a = Abort system shutdown in progress ONLY IF the -t xx timeout option was already set to ANY value other than 0. ALL switches except -l and -m are ignored during abort.
-c "Text" = Text comment (case insensitive) to be displayed in the Message area of the System Shutdown window. MUST be enclosed between quotes. Maximum allowed 127 ASCII characters.
-d [u][p]:xx:yy = Reason code for shutdown:
u = User code.
p = Planned shutdown code.
xx = Major reason code. Positive integer number less than 256.
yy = Minor reason code. Positive integer number less than 65536.
-f = Force running applications to close without warning.
-i = Display the shutdown interface (GUI). MUST be the first option!
-l = Log off the current user of the local computer (default action). Can NOT be used with the -m option unless the current user has Sysadmin rights, in which case the -m switch takes precedence.
-m \\computername = Remote/network computer name (most always case sensitive) to log off/restart/shut down. Current user MUST have Sysadmin rights to be allowed to use this switch!
-s = Shut down the local computer.
-r = Shut down and restart (reboot) the local computer.
-t xx = Set shutdown timer to timeout for xx seconds. IF NOT specified defaults to 20 seconds. Allowed values between 0 and 99 seconds. The -a switch is the ONLY one that CAN be used during the timeout period.
NOTES:
The dash (-) in front of these switches can be replaced by a forward slash (/).
Spaces are NOT required to separate the shutdown command from ANY following switches, but ARE required to separate ANY switch from its following parameter(s), if any.
For example:
shutdown -s -c "Shutting down!" -t 3
tells your computer to shutdown after waiting for 3 seconds while the System Shutdown window will display text above in the Message area.
Optional: after you're done creating your customized shortcut for shutdown -> right-click on it -> select Properties -> enter your desired key "combo" in the Shortcut Key box (e.g. Ctrl + Alt + End) -> click OK/Apply.
From now on just left-click on your shutdown shortcut or hit that key combination to turn off/restart/log off your computer.
Sunday, August 10, 2008
Speeding up menus in XP
Go to Start --> Run --> Regedt32
Go to HKEY_CURRENT_USER\Control Panel\Desktop
Locate the key called "MenuShowDelay" and it is probably set to 400.
Change that value to 150.
Reboot your computer.
You should notice a slight increase in the speed of your menus
Go to HKEY_CURRENT_USER\Control Panel\Desktop
Locate the key called "MenuShowDelay" and it is probably set to 400.
Change that value to 150.
Reboot your computer.
You should notice a slight increase in the speed of your menus
Windows Xp Tips, Take A Look !
Lock XP Workstation (#1)
You can lock your XP workstation with two clicks of the mouse. Create a new shortcut on your desktop using a right mouse click, and enter 'rundll32.exe user32.dll, LockWorkStation' in the location field. Give the shortcut a name you like. That's it -- just double click on it and your computer will be locked. And if that's not easy enough, Windows key + L will do the same.
Remove Windows XP system software (#2)
XP hides some system software you might want to remove, such as Windows Messenger, but you can tickle it and make it disgorge everything. Using Notepad or Edit, edit the text file /windows/inf/sysoc.inf, search for the word 'hide' and remove it. You can then go to the Add or Remove Programs in the Control Panel, select Add/Remove Windows Components and there will be your prey, exposed and vulnerable.
New commands (#3)
For those skilled in the art of DOS batch files, XP has a number of interesting new commands. These include 'eventcreate' and 'eventtriggers' for creating and watching system events, 'typeperf' for monitoring performance of various subsystems, and 'schtasks' for handling scheduled tasks. As usual, typing the command name followed by /? will give a list of options -- they're all far too baroque to go into here.
Windows XP supports IPv6 (#4)
XP has IP version 6 support -- the next generation of IP. Unfortunately this is more than your ISP has, so you can only experiment with this on your LAN. Type 'ipv6 install' into Run... (it's OK, it won't ruin your existing network setup) and then 'ipv6 /?' at the command line to find out more. If you don't know what IPv6 is, don't worry and don't bother.
Kill tasks from the command line (#5)
You can at last get rid of tasks on the computer from the command line by using 'taskkill /pid' and the task number, or just 'tskill' and the process number. Find that out by typing 'tasklist', which will also tell you a lot about what's going on in your system.
Enable ClearType by default (#6)
XP has ClearType -- Microsoft's anti-aliasing font display technology-- but doesn't have it enabled by default. It's well worth trying, especially if you were there for DOS and all those years of staring at a screen have given you the eyes of an astigmatic bat. To enable ClearType, right click on the desktop, select Properties, Appearance, Effects, select ClearType from the second drop-down menu and enable the selection. Expect best results on laptop displays. If you want to use ClearType on the Welcome login screen as well, set the registry entry
HKEY_USERS/.DEFAULT/ControlPanel/Desktop/FontSmoothingType to 2.
Run program as different user (#7)
You can run a program as a different user without logging out and back in again. Right click the icon, select Run As... and enter the user name and password you want to use. This only applies for that run. The trick is particularly useful if you need to have administrative permissions to install a program, which many require. Note that you can have some fun by running programs multiple times on the same system as different users, but this can have unforeseen effects.
Speed up the Start Menu (#8)
The Start Menu can be leisurely when it decides to appear, but you can speed things along by changing the registry entry HKEY_CURRENT_USER/Control Panel/Desktop/MenuShowDelay from the default 400 to something a little snappier. Like 0.
Rename multiple files at once (#9)
You can rename loads of files at once in Windows Explorer. Highlight a set of files in a window, then right click on one and rename it. All the other files will be renamed to that name, with individual numbers in brackets to distinguish them. Also, in a folder you can arrange icons in alphabetized groups by View, Arrange Icon By... Show In-Groups.
Show cover art in Media Player (#10)
Windows Media Player will display the cover art for albums as it plays the tracks -- if it found the picture on the Internet when you copied the tracks from the CD. If it didn't, or if you have lots of pre-WMP music files, you can put your own copy of the cover art in the same directory as the tracks. Just call it folder.jpg and Windows Media Player will pick it up and display it.
Display Hibernate Option on the Shut Down dialog (#11)
For some reason, Hibernate isn't available from the default Shut Down dialog. But you can enable it simply enough, by holding down the SHIFT key while the dialog is visible. Now you see it, now you don't!
Enable ClearType on the Welcome Screen! (#12)
As laptop users and other LCD owners are quickly realizing, Microsoft's ClearType technology in Windows XP really makes a big difference for readability. But the this feature is enabled on a per-user basis in Windows XP, so you can't see the effect on the Welcome screen; it only appears after you logon.
But you can fix that. Fire up the Registry Editor and look for the following keys:
(default user) HKEY_USERS \ .Default \ Control Panel \ Desktop \
FontSmoothing (String Value)
HKEY_USERS \ .Default \ Control Panel \ Desktop \
FontSmoothingType (Hexadecimal DWORD Value)
Make sure both of these values are set to 2 and you'll have ClearType enabled on the Welcome screen and on each new user by default.
Change User Picture (#13)
Click on the Icon at the top of the start menu. Select desired picture from resulting screen Windows 2000 style logon. To revert back to the Win2k style logon so you can log on as the administrator and other options, press ctrl+alt+delete twice at the logon screen. Change the location of the My Music or My Pictures folders:
In Windows 2000, Microsoft added the ability to right-click the My Documents folder and choose a new location for that folder in the shell. With Windows XP, Microsoft has elevated the My Music and My Pictures folders to the same "special shell folder" status of My Documents, but they never added a similar (and simple) method for changing those folder's locations. However, it is actually pretty easy to change the location of these folders, using the following method.
Open a My Computer window and navigate to the location where you'd like My Music (or My Pictures) to reside. Then, open the My Documents folder in a different window. Drag the My Music (or My Pictures) folder to the other window, and Windows XP will update all of the references to that folder to the new location, including the Start menu.
Protect Your Files From Unauthorized Users (#14)
Other users with permission to delete a file (users with Modify or Full Control permission) can't use your encrypted files-but they can make them difficult for you to use. Any such user can rename your files, which can make them difficult to find, and can also delete your files. (Even if the user merely deletes them to the Recycle Bin and doesn't remove them altogether, the deleted files are unavailable to you because you don't have access to any other user's Recycle Bin.) Therefore, if you're concerned about protecting your files from other authorized users as well as from a thief who steals your computer, you should modify the NTFS permissions to prevent any type of modification by other users.
Shutdown Your System in a Hurry (#15)
If you need to shut down in a hurry-or if a frozen application prevents you from shutting down in the normal ways-you can use the following procedure. Be aware, however, that you won't get an opportunity to save open documents. To perform an emergency shutdown, press Ctrl+Alt+Del to display Task Manager. Open the Shut down menu and hold down the Ctrl key as you click the Turn Off command. Poof! If your computer is part of a domain, the procedure is similar. Press Ctrl+Alt+Del and then hold down Ctrl when you click Shut Down. In this situation, you'll get a warning message pointing out-quite correctly-that this should be used only as a last resort.
Provide Personal Support (#16)
It never fails: when friends, co-workers, or family members discover that you're a Windows expert, you get pressed into service as an unpaid support technician. If the party asking for help is running any edition of Windows XP and has an active Internet connection, your job is much easier. Have the other person send you a Remote Assistance request; when you accept the request, you connect directly to their computer and can edit Registry settings, fix file associations, set System options, and perform just about any other troubleshooting or repair task, just as if you were sitting at the other person's desk.
Quickly Fix Connectivity Problems (#17)
Are you having trouble connecting to other computers on your local area network? If your network uses a hardware firewall that assigns IP addresses to each machine and you're certain you've configured all other components correctly, check to see whether the Internet Connection Firewall is enabled. That component can effectively block communication between PCs on the network.
Hack IE Title Bar (#18)
This can be an impressive bit of personalization. Use your name or moniker to brand Internet Explorer. Go to HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\ and left-click on Main to change the string "Window Title" to whatever you wish.
Unload DLLs (#19)
To prevent Windows from caching DLLs after the program using them has closed, follow this procedure: Navigate to
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\ then left-click on Explorer. Right-click (as above) and create the DWORD
AlwaysUnloadDLL with a value of 1. This requires a reboot to take effect. This will allow memory to be used more efficiently.
Registry Hacks (#20)
Editing the Windows Registry, while much more common now than in years past, is still not to be entered into lightly. You can break Windows, cause boot failure. I know you're gonna do it anyway; why else would you be reading this. Just be careful, OK?
These are few because, for the most part WinXP can be customized through the interlace or with third-party freeware (as above).
All of the tips below require running regedit. To do so, hit 'Start/Run' then type 'regedit' and follow the instructions.
Naturally, I take no responsibility for any damage or loss of data incurred in the remote possibility that something goes terribly wrong.
The Ultimate Appearance Tweak (#21)
Microsoft said: "You can connect up to 10 monitors to your Windows XP-based computer and display numerous programs or windows at one time. You can use your mouse to move items from one monitor to another. You can open a different file on each monitor. Or several. Or you can stretch one item across several monitors; so for example, you can see more columns in a Microsoft Excel spreadsheet, or the entire layout of a Web page, without scrolling." Consider it. Monitors and PCI video cards are pretty cheap now. Windows recognizes the addition & allows easy adjustments on the 'Display Properties/Settings' menu.
Save Streaming Media (#22)
It's cool to listen to MP3s (or watch movies) over the Internet. Often, saving this media, however, seems impossible. Hey, if it plays on your computer, it's on your hard drive. Once the file is fully loaded and with folder view set to show hidden and systems folders, searches for the media (.mp3 or .mpg). There it is!
Securing the Paging File (#23)
If you're truly concerned about the possibility of your computer falling into the wrong hands, you should be sure that you don't leave any tracks in the paging file. By default, when you shut down your system, the paging file remains intact. People who've access to your computer could conceivably look through the unencrypted paging file to find information they shouldn't have.
Assign a Keyboard Shortcut (#24)
Click in the Shortcut Key field and press a keyboard combination that you want to use for launching or switching to this program. The shortcut key you assign must consist of one character key (a letter, number, or symbol) plus at least two of the following three keys: Ctrl, Alt, and Shift. (If you press a character key only, Windows automatically adds Ctrl+Alt.)
Shortcut keys work only when assigned to a program shortcut on the Start menu, the Programs menu, or the Desktop. The shortcuts you define will not work if it conflicts with a combination used in the program whose window has the focus.
Please remember, we cannot accept responsibility with what you decide to do
You can lock your XP workstation with two clicks of the mouse. Create a new shortcut on your desktop using a right mouse click, and enter 'rundll32.exe user32.dll, LockWorkStation' in the location field. Give the shortcut a name you like. That's it -- just double click on it and your computer will be locked. And if that's not easy enough, Windows key + L will do the same.
Remove Windows XP system software (#2)
XP hides some system software you might want to remove, such as Windows Messenger, but you can tickle it and make it disgorge everything. Using Notepad or Edit, edit the text file /windows/inf/sysoc.inf, search for the word 'hide' and remove it. You can then go to the Add or Remove Programs in the Control Panel, select Add/Remove Windows Components and there will be your prey, exposed and vulnerable.
New commands (#3)
For those skilled in the art of DOS batch files, XP has a number of interesting new commands. These include 'eventcreate' and 'eventtriggers' for creating and watching system events, 'typeperf' for monitoring performance of various subsystems, and 'schtasks' for handling scheduled tasks. As usual, typing the command name followed by /? will give a list of options -- they're all far too baroque to go into here.
Windows XP supports IPv6 (#4)
XP has IP version 6 support -- the next generation of IP. Unfortunately this is more than your ISP has, so you can only experiment with this on your LAN. Type 'ipv6 install' into Run... (it's OK, it won't ruin your existing network setup) and then 'ipv6 /?' at the command line to find out more. If you don't know what IPv6 is, don't worry and don't bother.
Kill tasks from the command line (#5)
You can at last get rid of tasks on the computer from the command line by using 'taskkill /pid' and the task number, or just 'tskill' and the process number. Find that out by typing 'tasklist', which will also tell you a lot about what's going on in your system.
Enable ClearType by default (#6)
XP has ClearType -- Microsoft's anti-aliasing font display technology-- but doesn't have it enabled by default. It's well worth trying, especially if you were there for DOS and all those years of staring at a screen have given you the eyes of an astigmatic bat. To enable ClearType, right click on the desktop, select Properties, Appearance, Effects, select ClearType from the second drop-down menu and enable the selection. Expect best results on laptop displays. If you want to use ClearType on the Welcome login screen as well, set the registry entry
HKEY_USERS/.DEFAULT/ControlPanel/Desktop/FontSmoothingType to 2.
Run program as different user (#7)
You can run a program as a different user without logging out and back in again. Right click the icon, select Run As... and enter the user name and password you want to use. This only applies for that run. The trick is particularly useful if you need to have administrative permissions to install a program, which many require. Note that you can have some fun by running programs multiple times on the same system as different users, but this can have unforeseen effects.
Speed up the Start Menu (#8)
The Start Menu can be leisurely when it decides to appear, but you can speed things along by changing the registry entry HKEY_CURRENT_USER/Control Panel/Desktop/MenuShowDelay from the default 400 to something a little snappier. Like 0.
Rename multiple files at once (#9)
You can rename loads of files at once in Windows Explorer. Highlight a set of files in a window, then right click on one and rename it. All the other files will be renamed to that name, with individual numbers in brackets to distinguish them. Also, in a folder you can arrange icons in alphabetized groups by View, Arrange Icon By... Show In-Groups.
Show cover art in Media Player (#10)
Windows Media Player will display the cover art for albums as it plays the tracks -- if it found the picture on the Internet when you copied the tracks from the CD. If it didn't, or if you have lots of pre-WMP music files, you can put your own copy of the cover art in the same directory as the tracks. Just call it folder.jpg and Windows Media Player will pick it up and display it.
Display Hibernate Option on the Shut Down dialog (#11)
For some reason, Hibernate isn't available from the default Shut Down dialog. But you can enable it simply enough, by holding down the SHIFT key while the dialog is visible. Now you see it, now you don't!
Enable ClearType on the Welcome Screen! (#12)
As laptop users and other LCD owners are quickly realizing, Microsoft's ClearType technology in Windows XP really makes a big difference for readability. But the this feature is enabled on a per-user basis in Windows XP, so you can't see the effect on the Welcome screen; it only appears after you logon.
But you can fix that. Fire up the Registry Editor and look for the following keys:
(default user) HKEY_USERS \ .Default \ Control Panel \ Desktop \
FontSmoothing (String Value)
HKEY_USERS \ .Default \ Control Panel \ Desktop \
FontSmoothingType (Hexadecimal DWORD Value)
Make sure both of these values are set to 2 and you'll have ClearType enabled on the Welcome screen and on each new user by default.
Change User Picture (#13)
Click on the Icon at the top of the start menu. Select desired picture from resulting screen Windows 2000 style logon. To revert back to the Win2k style logon so you can log on as the administrator and other options, press ctrl+alt+delete twice at the logon screen. Change the location of the My Music or My Pictures folders:
In Windows 2000, Microsoft added the ability to right-click the My Documents folder and choose a new location for that folder in the shell. With Windows XP, Microsoft has elevated the My Music and My Pictures folders to the same "special shell folder" status of My Documents, but they never added a similar (and simple) method for changing those folder's locations. However, it is actually pretty easy to change the location of these folders, using the following method.
Open a My Computer window and navigate to the location where you'd like My Music (or My Pictures) to reside. Then, open the My Documents folder in a different window. Drag the My Music (or My Pictures) folder to the other window, and Windows XP will update all of the references to that folder to the new location, including the Start menu.
Protect Your Files From Unauthorized Users (#14)
Other users with permission to delete a file (users with Modify or Full Control permission) can't use your encrypted files-but they can make them difficult for you to use. Any such user can rename your files, which can make them difficult to find, and can also delete your files. (Even if the user merely deletes them to the Recycle Bin and doesn't remove them altogether, the deleted files are unavailable to you because you don't have access to any other user's Recycle Bin.) Therefore, if you're concerned about protecting your files from other authorized users as well as from a thief who steals your computer, you should modify the NTFS permissions to prevent any type of modification by other users.
Shutdown Your System in a Hurry (#15)
If you need to shut down in a hurry-or if a frozen application prevents you from shutting down in the normal ways-you can use the following procedure. Be aware, however, that you won't get an opportunity to save open documents. To perform an emergency shutdown, press Ctrl+Alt+Del to display Task Manager. Open the Shut down menu and hold down the Ctrl key as you click the Turn Off command. Poof! If your computer is part of a domain, the procedure is similar. Press Ctrl+Alt+Del and then hold down Ctrl when you click Shut Down. In this situation, you'll get a warning message pointing out-quite correctly-that this should be used only as a last resort.
Provide Personal Support (#16)
It never fails: when friends, co-workers, or family members discover that you're a Windows expert, you get pressed into service as an unpaid support technician. If the party asking for help is running any edition of Windows XP and has an active Internet connection, your job is much easier. Have the other person send you a Remote Assistance request; when you accept the request, you connect directly to their computer and can edit Registry settings, fix file associations, set System options, and perform just about any other troubleshooting or repair task, just as if you were sitting at the other person's desk.
Quickly Fix Connectivity Problems (#17)
Are you having trouble connecting to other computers on your local area network? If your network uses a hardware firewall that assigns IP addresses to each machine and you're certain you've configured all other components correctly, check to see whether the Internet Connection Firewall is enabled. That component can effectively block communication between PCs on the network.
Hack IE Title Bar (#18)
This can be an impressive bit of personalization. Use your name or moniker to brand Internet Explorer. Go to HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\ and left-click on Main to change the string "Window Title" to whatever you wish.
Unload DLLs (#19)
To prevent Windows from caching DLLs after the program using them has closed, follow this procedure: Navigate to
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\ then left-click on Explorer. Right-click (as above) and create the DWORD
AlwaysUnloadDLL with a value of 1. This requires a reboot to take effect. This will allow memory to be used more efficiently.
Registry Hacks (#20)
Editing the Windows Registry, while much more common now than in years past, is still not to be entered into lightly. You can break Windows, cause boot failure. I know you're gonna do it anyway; why else would you be reading this. Just be careful, OK?
These are few because, for the most part WinXP can be customized through the interlace or with third-party freeware (as above).
All of the tips below require running regedit. To do so, hit 'Start/Run' then type 'regedit' and follow the instructions.
Naturally, I take no responsibility for any damage or loss of data incurred in the remote possibility that something goes terribly wrong.
The Ultimate Appearance Tweak (#21)
Microsoft said: "You can connect up to 10 monitors to your Windows XP-based computer and display numerous programs or windows at one time. You can use your mouse to move items from one monitor to another. You can open a different file on each monitor. Or several. Or you can stretch one item across several monitors; so for example, you can see more columns in a Microsoft Excel spreadsheet, or the entire layout of a Web page, without scrolling." Consider it. Monitors and PCI video cards are pretty cheap now. Windows recognizes the addition & allows easy adjustments on the 'Display Properties/Settings' menu.
Save Streaming Media (#22)
It's cool to listen to MP3s (or watch movies) over the Internet. Often, saving this media, however, seems impossible. Hey, if it plays on your computer, it's on your hard drive. Once the file is fully loaded and with folder view set to show hidden and systems folders, searches for the media (.mp3 or .mpg). There it is!
Securing the Paging File (#23)
If you're truly concerned about the possibility of your computer falling into the wrong hands, you should be sure that you don't leave any tracks in the paging file. By default, when you shut down your system, the paging file remains intact. People who've access to your computer could conceivably look through the unencrypted paging file to find information they shouldn't have.
Assign a Keyboard Shortcut (#24)
Click in the Shortcut Key field and press a keyboard combination that you want to use for launching or switching to this program. The shortcut key you assign must consist of one character key (a letter, number, or symbol) plus at least two of the following three keys: Ctrl, Alt, and Shift. (If you press a character key only, Windows automatically adds Ctrl+Alt.)
Shortcut keys work only when assigned to a program shortcut on the Start menu, the Programs menu, or the Desktop. The shortcuts you define will not work if it conflicts with a combination used in the program whose window has the focus.
Please remember, we cannot accept responsibility with what you decide to do
Keyboard Shortcuts, must read
Windows key + R = Run menu
This is usually followed by:
cmd = Command Prompt
iexplore + "web address" = Internet Explorer
compmgmt.msc = Computer Management
dhcpmgmt.msc = DHCP Management
dnsmgmt.msc = DNS Management
services.msc = Services
eventvwr = Event Viewer
dsa.msc = Active Directory Users and Computers
dssite.msc = Active Directory Sites and Services
Windows key + E = Explorer
ALT + Tab = Switch between windows
ALT, Space, X = Maximize window
CTRL + Shift + Esc = Task Manager
Windows key + Break = System properties
Windows key + F = Search
Windows key + D = Hide/Display all windows
CTRL + C = copy
CTRL + X = cut
CTRL + V = paste
Also don't forget about the "Right-click" key next to the right Windows key on your keyboard. Using the arrows and that key can get just about anything done once you've opened up any program.
Keyboard Shortcuts
[Alt] and [Esc] Switch between running applications
[Alt] and letter Select menu item by underlined letter
[Ctrl] and [Esc] Open Program Menu
[Ctrl] and [F4] Close active document or group windows (does not work with some applications)
[Alt] and [F4] Quit active application or close current window
[Alt] and [-] Open Control menu for active document
Ctrl] Lft., Rt. arrow Move cursor forward or back one word
Ctrl] Up, Down arrow Move cursor forward or back one paragraph
[F1] Open Help for active application
Windows+M Minimize all open windows
Shift+Windows+M Undo minimize all open windows
Windows+F1 Open Windows Help
Windows+Tab Cycle through the Taskbar buttons
Windows+Break Open the System Properties dialog box
acessability shortcuts
Right SHIFT for eight seconds........ Switch FilterKeys on and off.
Left ALT +left SHIFT +PRINT SCREEN....... Switch High Contrast on and off.
Left ALT +left SHIFT +NUM LOCK....... Switch MouseKeys on and off.
SHIFT....... five times Switch StickyKeys on and off.
NUM LOCK...... for five seconds Switch ToggleKeys on and off.
explorer shortcuts
END....... Display the bottom of the active window.
HOME....... Display the top of the active window.
NUM LOCK+ASTERISK....... on numeric keypad (*) Display all subfolders under the selected folder.
NUM LOCK+PLUS SIGN....... on numeric keypad (+) Display the contents of the selected folder.
NUM LOCK+MINUS SIGN....... on numeric keypad (-) Collapse the selected folder.
LEFT ARROW...... Collapse current selection if it's expanded, or select parent folder.
RIGHT ARROW....... Display current selection if it's collapsed, or select first subfolder.
Type the following commands in your Run Box (Windows Key + R) or Start Run
devmgmt.msc = Device Manager
msinfo32 = System Information
cleanmgr = Disk Cleanup
ntbackup = Backup or Restore Wizard (Windows Backup Utility)
mmc = Microsoft Management Console
excel = Microsoft Excel (If Installed)
msaccess = Microsoft Access (If Installed)
powerpnt = Microsoft PowerPoint (If Installed)
winword = Microsoft Word (If Installed)
frontpg = Microsoft FrontPage (If Installed)
notepad = Notepad
wordpad = WordPad
calc = Calculator
msmsgs = Windows Messenger
mspaint = Microsoft Paint
wmplayer = Windows Media Player
rstrui = System Restore
netscp6 = Netscape 6.x
netscp = Netscape 7.x
netscape = Netscape 4.x
waol = America Online
control = Opens the Control Panel
control printers = Opens the Printers Dialog
internetbrowser
type in u're adress "google", then press [Right CTRL] and [Enter]
add www. and .com to word and go to it
This is usually followed by:
cmd = Command Prompt
iexplore + "web address" = Internet Explorer
compmgmt.msc = Computer Management
dhcpmgmt.msc = DHCP Management
dnsmgmt.msc = DNS Management
services.msc = Services
eventvwr = Event Viewer
dsa.msc = Active Directory Users and Computers
dssite.msc = Active Directory Sites and Services
Windows key + E = Explorer
ALT + Tab = Switch between windows
ALT, Space, X = Maximize window
CTRL + Shift + Esc = Task Manager
Windows key + Break = System properties
Windows key + F = Search
Windows key + D = Hide/Display all windows
CTRL + C = copy
CTRL + X = cut
CTRL + V = paste
Also don't forget about the "Right-click" key next to the right Windows key on your keyboard. Using the arrows and that key can get just about anything done once you've opened up any program.
Keyboard Shortcuts
[Alt] and [Esc] Switch between running applications
[Alt] and letter Select menu item by underlined letter
[Ctrl] and [Esc] Open Program Menu
[Ctrl] and [F4] Close active document or group windows (does not work with some applications)
[Alt] and [F4] Quit active application or close current window
[Alt] and [-] Open Control menu for active document
Ctrl] Lft., Rt. arrow Move cursor forward or back one word
Ctrl] Up, Down arrow Move cursor forward or back one paragraph
[F1] Open Help for active application
Windows+M Minimize all open windows
Shift+Windows+M Undo minimize all open windows
Windows+F1 Open Windows Help
Windows+Tab Cycle through the Taskbar buttons
Windows+Break Open the System Properties dialog box
acessability shortcuts
Right SHIFT for eight seconds........ Switch FilterKeys on and off.
Left ALT +left SHIFT +PRINT SCREEN....... Switch High Contrast on and off.
Left ALT +left SHIFT +NUM LOCK....... Switch MouseKeys on and off.
SHIFT....... five times Switch StickyKeys on and off.
NUM LOCK...... for five seconds Switch ToggleKeys on and off.
explorer shortcuts
END....... Display the bottom of the active window.
HOME....... Display the top of the active window.
NUM LOCK+ASTERISK....... on numeric keypad (*) Display all subfolders under the selected folder.
NUM LOCK+PLUS SIGN....... on numeric keypad (+) Display the contents of the selected folder.
NUM LOCK+MINUS SIGN....... on numeric keypad (-) Collapse the selected folder.
LEFT ARROW...... Collapse current selection if it's expanded, or select parent folder.
RIGHT ARROW....... Display current selection if it's collapsed, or select first subfolder.
Type the following commands in your Run Box (Windows Key + R) or Start Run
devmgmt.msc = Device Manager
msinfo32 = System Information
cleanmgr = Disk Cleanup
ntbackup = Backup or Restore Wizard (Windows Backup Utility)
mmc = Microsoft Management Console
excel = Microsoft Excel (If Installed)
msaccess = Microsoft Access (If Installed)
powerpnt = Microsoft PowerPoint (If Installed)
winword = Microsoft Word (If Installed)
frontpg = Microsoft FrontPage (If Installed)
notepad = Notepad
wordpad = WordPad
calc = Calculator
msmsgs = Windows Messenger
mspaint = Microsoft Paint
wmplayer = Windows Media Player
rstrui = System Restore
netscp6 = Netscape 6.x
netscp = Netscape 7.x
netscape = Netscape 4.x
waol = America Online
control = Opens the Control Panel
control printers = Opens the Printers Dialog
internetbrowser
type in u're adress "google", then press [Right CTRL] and [Enter]
add www. and .com to word and go to it
Keyboard Shortcuts Result in Excel 2000
F1 Key Help
F2 Key Edit current Cell
F5 Key Goto
F7 Key Spell Check
F12 Key Save file as
CTRL and A Select entire worksheet.
CTRL and B Toggle Bold Text.
CTRL and C Copies the item or items selected to the Clipboard and can be pasted using CTRL and V.
CTRL and F Displays the Find dialog box.
CTRL and H Displays the Replace dialog box.
CTRL and I Toggles Italic Text.
CTRL and N New File.
CTRL and O Open File.
CTRL and P Print.
CTRL and S Save File.
CTRL and U Toggles Underlined Text.
CTRL and V Paste the contents of the clipboard.
CTRL and X Cut the selected item.
CTRL and Y Redo the last undone action
CTRL and Z Undoes the last action.
CTRL and 1 Displays Format Cells Dialogue Box
CTRL and 5 Toggles Strikethrough Text
Keyboard Shortcuts Result in Excel 2000 - Formulas
ALT and = Autosum
ALT and F8 Macros
CTRL and ; Insert Current Date
CTRL and : Insert Current Time
Keyboard Shortcuts Result in Excel 2000 - Movement
Left Arrow One Cell Left (also SHIFT and TAB)
Right Arrow One Cell Right (also TAB)
Up Arrow One Cell Up
Down Arrow One Cell Down
Home Go to End of row
CTRL and left Arrow Go to End of Column
CTRL and Home Go to Top of Worksheet (A1)
CTRL and End Go to End of Worksheet
CTRL and PAGE-DOWN Go to Next Worksheet
Keyboard Shortcuts Result in Excel 2000 - Cell Selection
CTRL and Spacebar Select the entire Column
SHIFT and Spacebar Select the entire Row
CTRL and A Select Entire Worksheet
SHIFT and Left Cursor Select all cells to the left of the active one
SHIFT and Right Cursor Select all cells to the right of the active one
F2 Key Edit current Cell
F5 Key Goto
F7 Key Spell Check
F12 Key Save file as
CTRL and A Select entire worksheet.
CTRL and B Toggle Bold Text.
CTRL and C Copies the item or items selected to the Clipboard and can be pasted using CTRL and V.
CTRL and F Displays the Find dialog box.
CTRL and H Displays the Replace dialog box.
CTRL and I Toggles Italic Text.
CTRL and N New File.
CTRL and O Open File.
CTRL and P Print.
CTRL and S Save File.
CTRL and U Toggles Underlined Text.
CTRL and V Paste the contents of the clipboard.
CTRL and X Cut the selected item.
CTRL and Y Redo the last undone action
CTRL and Z Undoes the last action.
CTRL and 1 Displays Format Cells Dialogue Box
CTRL and 5 Toggles Strikethrough Text
Keyboard Shortcuts Result in Excel 2000 - Formulas
ALT and = Autosum
ALT and F8 Macros
CTRL and ; Insert Current Date
CTRL and : Insert Current Time
Keyboard Shortcuts Result in Excel 2000 - Movement
Left Arrow One Cell Left (also SHIFT and TAB)
Right Arrow One Cell Right (also TAB)
Up Arrow One Cell Up
Down Arrow One Cell Down
Home Go to End of row
CTRL and left Arrow Go to End of Column
CTRL and Home Go to Top of Worksheet (A1)
CTRL and End Go to End of Worksheet
CTRL and PAGE-DOWN Go to Next Worksheet
Keyboard Shortcuts Result in Excel 2000 - Cell Selection
CTRL and Spacebar Select the entire Column
SHIFT and Spacebar Select the entire Row
CTRL and A Select Entire Worksheet
SHIFT and Left Cursor Select all cells to the left of the active one
SHIFT and Right Cursor Select all cells to the right of the active one
Keyboard Shortcuts, Microsoft Word
CTRL and A Selects all in the current document.
CTRL and B Bold text.
CTRL and C Copies the item or text to the Clipboard and can be pasted using CTRL and V.
CTRL and D Displays the Font dialogue box.
CTRL and E Centre Alignment.
CTRL and F Displays the Find dialog box, to search the current document.
CTRL and G Displays the Go to dialog box, to go to a specific location in the current document.
CTRL and H Displays the Replace dialogue box.
CTRL and I Italic text.
CTRL and J Full Justification.
CTRL and K Create Hyperlink
CTRL and L Left Alignment
CTRL and M Tab
CTRL and N Creates a new document.
CTRL and O Displays the Open File dialogue box.
CTRL and P Displays the Print dialog box.
CTRL and R Right Alignment.
CTRL and S Displays the Save dialog box.
CTRL and U Underline text
CTRL and V Pastes the copied item or text from the Clipboard into the current position in the document.
CTRL and X Cuts the item or text selected to the Clipboard.
CTRL and Y Redo the last undone action.
CTRL and Z Undoes the last action.
CTRL and ENTER Insert Page Break.
CTRL and F2 Show Print preview.
CTRL and F4 Closes the active document window.
CTRL and F6 Opens the next document window.
Keyboard Shortcuts Result in Microsoft Word
F1 key Get help or use the Office assistant.
SHIFT and F1 Key Context sensitive help.
F2 Key Move text or image.
SHIFT and F2 Key Copy Text.
F3 Key Insert an autotext entry.
SHIFT and F3 Key Change the case of the selected text.
F4 Key Perform last action again.
SHIFT and F4 Key Perform a Find or Go to action again.
F5 Key Displays the Go to dialogue box, from here you can also Find and Replace.
SHIFT and F5 Key Move to a previous revision.
F6 Key Go to the next frame or pane.
SHIFT and F6 Key Go to the previous frame or pane.
F7 Key Launch the Spell checker.
SHIFT and F7 Key Launch the Thesaurus.
F8 Key Extend the current selection.
SHIFT and F8 Key Shrink the current selection.
F9 Key Update the selected fields.
SHIFT and F9 Key Switch between a field code and it's result.
F10 Key Activate the menu bar.
SHIFT and F10 Key Display a Shortcut Menu. Same as right clicking.
F11 Key Go to the next field.
SHIFT and F11 Key Go to the previous field.
F12 Key Save file As, equivalent to tools menu.
SHIFT and F12 Key Save document, equivalent to tools menu
CTRL and B Bold text.
CTRL and C Copies the item or text to the Clipboard and can be pasted using CTRL and V.
CTRL and D Displays the Font dialogue box.
CTRL and E Centre Alignment.
CTRL and F Displays the Find dialog box, to search the current document.
CTRL and G Displays the Go to dialog box, to go to a specific location in the current document.
CTRL and H Displays the Replace dialogue box.
CTRL and I Italic text.
CTRL and J Full Justification.
CTRL and K Create Hyperlink
CTRL and L Left Alignment
CTRL and M Tab
CTRL and N Creates a new document.
CTRL and O Displays the Open File dialogue box.
CTRL and P Displays the Print dialog box.
CTRL and R Right Alignment.
CTRL and S Displays the Save dialog box.
CTRL and U Underline text
CTRL and V Pastes the copied item or text from the Clipboard into the current position in the document.
CTRL and X Cuts the item or text selected to the Clipboard.
CTRL and Y Redo the last undone action.
CTRL and Z Undoes the last action.
CTRL and ENTER Insert Page Break.
CTRL and F2 Show Print preview.
CTRL and F4 Closes the active document window.
CTRL and F6 Opens the next document window.
Keyboard Shortcuts Result in Microsoft Word
F1 key Get help or use the Office assistant.
SHIFT and F1 Key Context sensitive help.
F2 Key Move text or image.
SHIFT and F2 Key Copy Text.
F3 Key Insert an autotext entry.
SHIFT and F3 Key Change the case of the selected text.
F4 Key Perform last action again.
SHIFT and F4 Key Perform a Find or Go to action again.
F5 Key Displays the Go to dialogue box, from here you can also Find and Replace.
SHIFT and F5 Key Move to a previous revision.
F6 Key Go to the next frame or pane.
SHIFT and F6 Key Go to the previous frame or pane.
F7 Key Launch the Spell checker.
SHIFT and F7 Key Launch the Thesaurus.
F8 Key Extend the current selection.
SHIFT and F8 Key Shrink the current selection.
F9 Key Update the selected fields.
SHIFT and F9 Key Switch between a field code and it's result.
F10 Key Activate the menu bar.
SHIFT and F10 Key Display a Shortcut Menu. Same as right clicking.
F11 Key Go to the next field.
SHIFT and F11 Key Go to the previous field.
F12 Key Save file As, equivalent to tools menu.
SHIFT and F12 Key Save document, equivalent to tools menu
Keep Folders Hidden
first create a new folder somewhere on your hard drive
when you name it hold down "Alt" and press "0160" this will create and invisible space so it will apper as if it has no name.
then right click in and select "Properties" select the tab "coustimize" and select "change icon" scroll along and you should a few blanc spaces click on any one and click ok when you hav saved the settings the folder will be invisible to hide all your personal files
when you name it hold down "Alt" and press "0160" this will create and invisible space so it will apper as if it has no name.
then right click in and select "Properties" select the tab "coustimize" and select "change icon" scroll along and you should a few blanc spaces click on any one and click ok when you hav saved the settings the folder will be invisible to hide all your personal files
How To Speed Up A Slow Computer
first off in the bottom right hand corner of your computer if you see alot of icons start up there when you first start your computer then this is for you if you dont know already how to get rid of em.
Press your Start Button (bottom left) and go to "run"
now type in: msconfig
now you will get a box that pops up and will tell you bunch of stuff dont mess with anything else other than what I tell you otherwise you could do something really bad (possible) go to your "startup" tab on the top right of the screen where it usually is and click it.
Now you will have a closed in box with bunch of filenames n addresses and more boxes with checks in them. Now if your like me you dont want anything startin up when you start you computer up or while your even doing anything cause it slows you down. Now unless your like me right now 1 have 1 thing starting up when my computer starts up and thats my settin for my overclocked vid card. But other than that uncheck every box and then hit apply and ok. Then window you were jus in will now close and ask you if you want to restart or wait till later to restart.
Either way when you shut it off and then turn it back on the settins will kick in
Press your Start Button (bottom left) and go to "run"
now type in: msconfig
now you will get a box that pops up and will tell you bunch of stuff dont mess with anything else other than what I tell you otherwise you could do something really bad (possible) go to your "startup" tab on the top right of the screen where it usually is and click it.
Now you will have a closed in box with bunch of filenames n addresses and more boxes with checks in them. Now if your like me you dont want anything startin up when you start you computer up or while your even doing anything cause it slows you down. Now unless your like me right now 1 have 1 thing starting up when my computer starts up and thats my settin for my overclocked vid card. But other than that uncheck every box and then hit apply and ok. Then window you were jus in will now close and ask you if you want to restart or wait till later to restart.
Either way when you shut it off and then turn it back on the settins will kick in
How to find a remote IP
To view someone's IP# when they send you hotmail email do this:
1) Click "Options" on the upper right side of the page.
2) On the left side of the page, Click "Mail"
3) Click "Mail Display Settings"
4) Under "Message Headers" select "Full" or "Advanced"
5) Click ok
1) Click "Options" on the upper right side of the page.
2) On the left side of the page, Click "Mail"
3) Click "Mail Display Settings"
4) Under "Message Headers" select "Full" or "Advanced"
5) Click ok
How Long Has Your System Been Running?
Here's how you verify system uptime:
Click Start | Run and type cmd to open a command prompt.
At the prompt, type systeminfo
Scroll down the list of information to the line that says System Up Time.
This will tell you in days, hours, minutes and seconds how long the system has been up.
Note that this command only works in XP Pro, not in XP Home. You can, however, type net statistics workstation at the prompt in Home. The first line will tell you the day and time that the system came online.
Click Start | Run and type cmd to open a command prompt.
At the prompt, type systeminfo
Scroll down the list of information to the line that says System Up Time.
This will tell you in days, hours, minutes and seconds how long the system has been up.
Note that this command only works in XP Pro, not in XP Home. You can, however, type net statistics workstation at the prompt in Home. The first line will tell you the day and time that the system came online.
Subscribe to:
Comments (Atom)